Description

Audio-Technica Drum Microphones

Here's what Audio-Technica say about the ATM350D:

The ATM350a is the ultimate microphone solution for discreet, rock-solid mounting on your instrument of choice, from Piano to 20-piece Drum Kit. Offering a crisp, clear, well-balanced response, even at extreme SPLs, the ATM350a is ready to capture your sound, whatever instrument you choose. The AT8491D drum mount allows for greater robustness on the road, reduces vibration and minimises the chance of damage from misplaced stick hits.

Features

• Rugged drum mount allows for greater robustness on the road
• Reduces vibration and minimises the chance of damage from stick hits
• Built to handle extremely powerful, dynamic sound sources
• Large selection of other mount options available separately
• Packaged with AT8490 Gooseneck
• Lifetime Warranty

• ATM350a microphone
• AT8490 gooseneck
• AT8491D drum mount
• AT8543 power module
• AT8468 velcro mount
• Hard carrying case

Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 40 – 20,000 Hz
• Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
• Impedance: 200 ohms
• Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
• Low Frequency Roll Off: 80 Hz, 12 dB/octave
• Switches: Flat, roll-off
• Dynamic Range: 130 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11– 52V DC, 3.5 mA typical
• Weight Microphone: 14.5 g (0.5 oz) Powermodule: 90 g (3.2 oz)
• Dimensions: Microphone: 37.8 mm (1.49'') long, 12.2 mm (0.48'') maximum body diameter. Powermodule: 92 mm (3.62") long, 18.9 mm (0.74") diameter
• Output Connector: Powermodule: Integral 3-pin XLRM-type
• Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
• Accessories Included ATM350a cardioid condenser microphone; AT8543 power module; AT8491D UniMount® drum mount; AT8490 UniMount® 5" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case